View Question Textbook
Question Filters
Results
Showing 1-20 of 776 (Page 1 of 39) • Filter: Suspected duplicates'चालू व्यापार' (Going Concern) अवधारणा के अनुसार, निम्नलिखित में से कौन-सा कथन सही है? / According to the 'Going Concern' concept, which of the following statements is correct?
4 similar found — View groupSolution:
Under the going concern concept, a business is assumed to continue for the foreseeable future without intention of liquidation. Assets are measured at historical cost rather than break-up value. This supports accrual accounting and systematic depreciation over useful life. चालू व्यापार अवधारणा (Going Concern Concept) के अनुसार यह माना जाता है कि व्यापार अनिश्चितकाल तक चलता रहेगा और निकट भविष्य में इसे बन्द करने का कोई इरादा नहीं है. इसी कारण परिसम्पत्तियों का मूल्यांकन उनके ऐतिहासिक लागत मूल्य पर किया जाता है, न कि विक्रय मूल्य या परिसमापन मूल्य पर. यह अवधारणा ह्रास (Depreciation) लगाने का आधार भी प्रदान करती है.
ABC Ltd. (सूचीबद्ध) ने FY में ₹80 लाख शुद्ध लाभ अर्जित किया. MD को ₹60 लाख वार्षिक पारिश्रमिक देना चाहते हैं. सही संयोजन? / ABC Ltd. (listed) earned net profit ₹80 lakh. Wishes to pay MD ₹60 lakh annual remuneration. Correct combination?
4 similar found — View groupSolution:
Section 197 caps MD remuneration at 11 percent of net profit or Rs 60 lakh whichever is lower. Eleven percent of 80 lakh is 8.8 lakh, so Rs 60 lakh exceeds limit without approval and payment is prohibited. If approved, it would be P&L expense with TDS under Section 392. Sec 197: listed co. MD max 11% net profit या ₹60L whichever lower. 11% of 80L = ₹8.8L < ₹60L, अतः ₹60L Sec 197 approval के बिना prohibited. अनुमति होने पर P&L expense + TDS u/s 392.
CAS-1 (लागत लेखांकन मानक-1) किससे सम्बन्धित है? / CAS-1 (Cost Accounting Standard-1) relates to which of the following?
4 similar found — View groupSolution:
CAS-1 (Revised 2015) covers 'Classification of Cost' - the framework for classifying costs as direct/indirect, fixed/variable, product/period, etc. Correct ICMAI CAS mapping: CAS-1 = Classification of Cost, CAS-2 = Capacity Determination, CAS-3 = Production Overheads, CAS-4 = Captive Consumption, CAS-5 = Avg. Transportation Cost, CAS-6 = Material Cost, CAS-7 = Employee Cost, CAS-8 = Utilities, CAS-9 = Packing Material, CAS-10 = Direct Expenses, CAS-11 = Administrative OH, CAS-12 = Repairs & Maintenance, CAS-16 = Depreciation. CAS-1 (Revised 2015) = 'लागत का वर्गीकरण' (Classification of Cost) - सामग्री एवं अन्य लागतों को प्रत्यक्ष/अप्रत्यक्ष, स्थिर/परिवर्तनशील, उत्पाद/अवधि आदि में वर्गीकृत करने का ढाँचा. ICMAI (ICMAI) के सही CAS मानक: CAS-1 = लागत वर्गीकरण, CAS-2 = क्षमता निर्धारण, CAS-3 = उत्पादन उपरिव्यय, CAS-4 = बन्दी उपभोग (Captive Consumption), CAS-5 = परिवहन औसत लागत, CAS-6 = सामग्री लागत, CAS-7 = कर्मचारी लागत, CAS-8 = उपयोगिता लागत, CAS-9 = पैकिंग, CAS-10 = प्रत्यक्ष व्यय, CAS-11 = प्रशासनिक उपरिव्यय, CAS-12 = मरम्मत, CAS-16 = ह्रास.
CAS-2 (लागत लेखांकन मानक-2) का विषय क्या है? / What is the subject matter of CAS-2 (Cost Accounting Standard-2)?
4 similar found — View groupSolution:
CAS-2 (Cost Accounting Standard-2) deals with 'Capacity Determination.' It prescribes principles for measurement and classification of different types of capacity: Installed Capacity, Practical Capacity, Normal Capacity, Actual Capacity, and Idle Capacity. Capacity Utilization Ratio is crucial for cost control and overhead absorption. Key CAS mapping: CAS-1 = Classification of Cost, CAS-2 = Capacity Determination, CAS-3 = Production Overheads, CAS-6 = Material Cost, CAS-7 = Employee Cost, CAS-16 = Depreciation. CAS-2 (Cost Accounting Standard-2) 'क्षमता निर्धारण' (Capacity Determination) से सम्बन्धित है. यह मानक विभिन्न प्रकार की क्षमताओं - स्थापित क्षमता (Installed Capacity), व्यावहारिक क्षमता (Practical Capacity), सामान्य क्षमता (Normal Capacity), वास्तविक क्षमता (Actual Capacity), और निष्क्रिय क्षमता (Idle Capacity) - के मापन और वर्गीकरण के सिद्धान्त निर्धारित करता है. क्षमता उपयोग अनुपात लागत नियन्त्रण के लिए महत्वपूर्ण है.
Closing Stock ₹4,00,000 (AS-2 NRV ₹3,70,000), Debtors ₹6,00,000, Creditors ₹2,00,000, Cash ₹1,00,000. Quick Ratio और Stock valuation? / Closing Stock ₹4,00,000 (NRV ₹3,70,000 per AS-2), Debtors ₹6,00,000, Creditors ₹2,00,000, Cash ₹1,00,000. Quick Ratio and stock valuation?
4 similar found — View groupSolution:
Under AS-2 inventory is valued at lower of cost and NRV giving 3,70,000. Quick ratio excludes stock: quick assets of 7,00,000 divided by current liabilities 2,00,000 equals 3.5:1. GST valuation under Section 15 is separate from financial reporting stock measurement. AS-2: stock = min(cost, NRV) = ₹3,70,000. Quick assets = Cash + Debtors = ₹7,00,000 (stock excluded). QR = 7,00,000/2,00,000 = 3.5:1.
GST के अन्तर्गत, आगत कर प्रत्यय (Input Tax Credit - ITC) प्राप्त करने के लिए धारा 16 के अनुसार कौन-सी शर्त आवश्यक नहीं है? / Under GST, as per Section 16, which condition is NOT necessary to avail Input Tax Credit (ITC)?
4 similar found — View groupSolution:
As per Section 16 of the CGST Act, the conditions for availing ITC are: (i) possession of tax invoice or debit note; (ii) goods/services must have been received; (iii) tax must have been deposited by the supplier to the government; (iv) return must have been filed; and (v) payment made within 180 days. Annual turnover exceeding ₹1 crore is NOT a condition for ITC - any registered taxpayer, regardless of turnover, is entitled to claim ITC on eligible inputs used in the course of business. CGST अधिनियम की धारा 16 के अनुसार ITC प्राप्त करने की शर्तें हैं: (i) कर बीजक या डेबिट नोट होना चाहिए, (ii) वस्तुएँ/सेवाएँ प्राप्त होनी चाहिए, (iii) आपूर्तिकर्ता ने कर जमा किया हो, (iv) खरीदार ने विवरणी दाखिल की हो, और (v) 180 दिनों के भीतर भुगतान किया गया हो. वार्षिक कारोबार ₹1 करोड़ से अधिक होना ITC की शर्त नहीं है - किसी भी पंजीकृत करदाता को ITC का अधिकार है.
GST में 'आपूर्ति का समय' (Time of Supply) वस्तुओं के लिए कब निर्धारित होता है? (सामान्य स्थिति) / In GST, when is the 'Time of Supply' determined for goods? (Normal case)
4 similar found — View groupSolution:
As per Section 12 of CGST Act, the Time of Supply for GOODS is the EARLIER of: (i) Date of INVOICE issue, or (ii) Date of PAYMENT receipt. The Time of Supply is critical because the TAX LIABILITY arises on this date, and tax must be deposited in the corresponding tax period's return. For services (Section 13), the rule is similar but includes the date of provision of service as an additional reference point. CGST अधिनियम 2017 की धारा 12 के अनुसार, वस्तुओं के लिए आपूर्ति का समय (Time of Supply) निम्नलिखित में से जो भी पहले हो: (i) बीजक (Invoice) जारी करने की तिथि, या (ii) भुगतान (Payment) प्राप्त होने की तिथि. आपूर्ति का समय इसलिए महत्वपूर्ण है क्योंकि कर दायित्व (Tax Liability) इसी तिथि पर उत्पन्न होता है और उसी कर अवधि में कर जमा करना होता है.
GST में प्रत्यावर्ती प्रभार तन्त्र (Reverse Charge Mechanism - RCM) के अन्तर्गत, कर का भुगतान कौन करता है? / Under the Reverse Charge Mechanism (RCM) in GST, who pays the tax?
4 similar found — View groupSolution:
Reverse Charge Mechanism (RCM) under CGST Act Sections 9(3) and 9(4) shifts the GST payment obligation from the supplier to the RECIPIENT. Normally, the supplier collects and deposits tax, but under RCM the recipient pays GST directly. RCM applies to specified goods/services such as: legal services from advocates, Goods Transport Agency (GTA) services, services by government/local authority, etc. RCM ensures tax collection even from unregistered or small suppliers in the unorganized sector. प्रत्यावर्ती प्रभार तन्त्र (Reverse Charge Mechanism - RCM) CGST अधिनियम की धारा 9(3) और 9(4) के अन्तर्गत लागू होता है. सामान्य GST में कर आपूर्तिकर्ता (Supplier) द्वारा एकत्र और जमा किया जाता है, परन्तु RCM में कर का भुगतान प्राप्तकर्ता (Recipient) करता है. RCM निर्दिष्ट वस्तुओं/सेवाओं पर लागू होता है, जैसे: अधिवक्ता सेवाएँ, गुड्स ट्रांसपोर्ट एजेंसी (GTA), सरकार/स्थानीय प्राधिकरण की सेवाएँ आदि.
IGST अधिनियम की धारा 10 के अनुसार, अन्तर्राज्यीय वस्तुओं की आपूर्ति में 'आपूर्ति का स्थान' (Place of Supply) कैसे निर्धारित होता है, जब वस्तुओं का संचलन (Movement) होता है? / As per Section 10 of the IGST Act, how is the 'Place of Supply' determined in inter-state supply of goods involving movement of goods?
4 similar found — View groupSolution:
As per Section 10(1)(a) of IGST Act 2017, when supply of goods involves MOVEMENT, the Place of Supply is the location where the delivery of goods TERMINATES (i.e., where goods are delivered to the recipient). This reflects the DESTINATION-BASED principle of GST - tax revenue goes to the consuming state, not the producing state. If goods move from Rajasthan to Delhi, place of supply is Delhi, making it an inter-state supply attracting IGST. IGST अधिनियम 2017 की धारा 10(1)(a) के अनुसार, जब वस्तुओं की आपूर्ति में संचलन (Movement) शामिल हो, तो आपूर्ति का स्थान (Place of Supply) वह स्थान होगा जहाँ माल की डिलीवरी या प्राप्तकर्ता को माल का वितरण समाप्त होता है. यह GST का 'गन्तव्य-आधारित' (Destination-Based) सिद्धान्त है - कर उस राज्य को मिलता है जहाँ वस्तु का उपभोग होता है, न कि जहाँ से वह भेजी जाती है.
Ind AS 1 (वित्तीय विवरणों की प्रस्तुति) के अनुसार, वित्तीय विवरणों का एक पूर्ण सेट (Complete Set) में निम्नलिखित में से क्या शामिल नहीं है? / As per Ind AS 1 (Presentation of Financial Statements), which of the following is NOT included in a complete set of financial statements?
4 similar found — View groupSolution:
As per Ind AS 1, a COMPLETE SET of financial statements includes: (i) Balance Sheet; (ii) Statement of Profit or Loss and Other Comprehensive Income (OCI); (iii) Statement of Changes in Equity; (iv) Cash Flow Statement; and (v) Notes including Significant Accounting Policies. A Cost Accounting Statement is NOT part of this set - it is a separate management/cost accounting report, not a financial reporting requirement under Ind AS. Ind AS 1 के अनुसार वित्तीय विवरणों के पूर्ण सेट में शामिल हैं: (i) तुलन पत्र (Balance Sheet), (ii) लाभ या हानि एवं अन्य व्यापक आय का विवरण (Statement of Profit or Loss and OCI), (iii) इक्विटी में परिवर्तन का विवरण (Statement of Changes in Equity), (iv) रोकड़ प्रवाह विवरण (Cash Flow Statement), और (v) महत्वपूर्ण लेखांकन नीतियों सहित टिप्पणियाँ (Notes including significant accounting policies). लागत लेखा विवरण Ind AS 1 का भाग नहीं है.
IT Act 2025 - निम्न कथनों पर विचार करें: / कथन I: Section 67 of IT Act 2025 is the charging section for capital gains. / कथन II: Indexation benefit on long-term capital gains is available under Section 73 of IT Act 2025. / Statement I: Section 67 of IT Act 2025 is the charging section for capital gains. / Statement II: Indexation benefit on long-term capital gains is available under Section 73 of IT Act 2025.
4 similar found — View groupSolution:
Statement I is correct because Section 67, equivalent to old Section 45, is the charging section for capital gains under IT Act 2025. Statement II is incorrect because Section 73 relates to cost of acquisition in certain modes, not indexation. Under the new Act, indexation on long-term capital gains has been removed and flat rates of 12.5 percent apply under Sections 197 and 198 for LTCG. कथन I सही - Sec 67 (पुरानी Sec 45) पूँजी अभिलाभ की charging section है. कथन II गलत - Sec 73 (पुरानी Sec 49) लागत निर्धारण से सम्बन्धित है; IT Act 2025 में LTCG पर indexation समाप्त, Sec 197/198 में flat 12.5% दर. Indexation benefit अब उपलब्ध नहीं.
IT Act 2025 - निम्न धाराओं को उनके विषय से सुमेलित करें: / सूची-I: (a) Sec 33 (b) Sec 123 (c) Sec 392 (d) Sec 202 / सूची-II: (i) TDS on Salary (ii) New Default Tax Regime (iii) Depreciation (iv) Life Insurance/PPF Deduction (Schedule XV) / Match IT Act 2025 sections to provisions: List-I: (a) Sec 33 (b) Sec 123 (c) Sec 392 (d) Sec 202 List-II: (i) TDS on Salary (ii) New Default Tax Regime (iii) Depreciation (iv) Life Insurance/PPF
4 similar found — View groupSolution:
Section 33 covers depreciation formerly in Section 32. Section 123 covers life insurance and PPF deductions under Schedule XV, equivalent to old Section 80C. Section 392 covers TDS on salary, replacing old Section 192. Section 202 provides the new default tax regime formerly under Section 115BAC. TDS provisions are consolidated in Sections 392-395 and Chapter VI-A deductions now appear in Chapter VIII Sections 122-154. Sec 33 = ह्रास (पुरानी Sec 32); Sec 123 = जीवन बीमा/PPF कटौती Schedule XV (पुरानी 80C); Sec 392 = वेतन पर TDS (पुरानी 192); Sec 202 = नयी डिफ़ॉल्ट कर व्यवस्था (पुरानी 115BAC). TDS अब Sec 392-395 में consolidated; कटौतियाँ Chapter VIII (Sec 122-154) में स्थानांतरित.
IT Act 2025 Sec 156 - Ms. B (new regime u/s 202) की Tax Year 2026-27 कुल आय ₹11,00,000 (salary, standard deduction ₹75,000 already adjusted). Sec 202 slabs पर tax और Sec 156 rebate के बाद net tax? / Ms. B (new regime u/s 202) has total income ₹11,00,000 (standard deduction ₹75,000 already adjusted). Tax after Sec 202 slabs and Sec 156 rebate?
4 similar found — View groupSolution:
Under Section 202, tax is nil up to 4 lakh, 5 percent on the next 4 lakh gives 20,000, and 10 percent on the next 3 lakh gives 30,000, totalling 50,000 before rebate. Section 156 provides rebate up to 12 lakh income with marginal relief, reducing net tax to nil in this case. Standard deduction of 75,000 for salary is available under Section 19 in the new regime. Sec 202: Nil upto 4L; 5% on 4-8L = ₹20,000; 10% on 8-11L = ₹30,000. Gross tax = ₹50,000. Sec 156 rebate: income upto ₹12L पर tax rebate (marginal relief सहित) - net tax Nil. Standard deduction new regime में ₹75,000 (Sec 19).
IT Act 2025 Sec 202 (New Regime) - Mr. A (resident individual) की Tax Year 2026-27 कुल आय ₹24,00,000 (कोई deduction नहीं). Sec 156 rebate लागू नहीं (आय > ₹12L). कर की गणना करें: / Mr. A has total income ₹24,00,000 under Sec 202 new regime (no deductions). No Sec 156 rebate (income exceeds ₹12L). Calculate tax:
4 similar found — View groupSolution:
Under Section 202 new regime slabs: ₹0-4L = Nil; ₹4-8L @5% = ₹20,000; ₹8-12L @10% = ₹40,000; ₹12-16L @15% = ₹60,000; ₹16-20L @20% = ₹80,000; ₹20-24L @25% = ₹1,00,000. Total Tax = ₹20,000 + ₹40,000 + ₹60,000 + ₹80,000 + ₹1,00,000 = ₹3,00,000. Section 156 rebate applies for income up to ₹12L with marginal relief; here income is ₹24L, so no rebate. The 30% slab starts above ₹24L. Sec 202 स्लैब (नई व्यवस्था): ₹0-4L = शून्य; ₹4-8L @5% = ₹20,000; ₹8-12L @10% = ₹40,000; ₹12-16L @15% = ₹60,000; ₹16-20L @20% = ₹80,000; ₹20-24L @25% = ₹1,00,000. कुल कर = ₹20,000 + ₹40,000 + ₹60,000 + ₹80,000 + ₹1,00,000 = ₹3,00,000. Sec 156 rebate ₹12L तक आय पर उपलब्ध; यहाँ आय ₹24L अतः rebate लागू नहीं. ₹24L से ऊपर @30% स्लैब शुरू होता है.
IT Act 2025 की Section 392 किस विषय से सम्बन्धित है? / Section 392 of IT Act 2025 deals with which subject?
4 similar found — View groupSolution:
Section 392 covers TDS on salary and replaces old Sections 192 and 192A. Section 393 consolidates TDS on all other payments from more than thirty old sections into a single table. Section 394 covers TCS replacing old Section 206C. Section 395 covers certificates. Section 63 covers tax audit requirements formerly under Section 44AB. Section 392 = TDS on Salary (पुरानी Sec 192, 192A). Section 393 = अन्य सभी TDS (30+ पुरानी धाराएँ merged); Section 394 = TCS (पुरानी 206C); Section 395 = Certificates (पुरानी 197, 203); Section 63 = Tax Audit (पुरानी 44AB).
XYZ Ltd. ने 1 अप्रैल 2025 को ₹8,00,000 की मशीनरी खरीदी (अवशिष्ट मूल्य ₹80,000, जीवन 8 वर्ष). 1 अप्रैल 2027 को SLM से WDV (15%) में परिवर्तन किया. 31 मार्च 2028 को WDV पद्धति से ह्रास-पश्चात बही मूल्य (Written Down Value) क्या होगा? / XYZ Ltd. purchased machinery for ₹8,00,000 on 1 April 2025 (scrap ₹80,000, life 8 years). On 1 April 2027 changed from SLM to WDV (15%). Book value AFTER depreciation (WDV) on 31 March 2028?
4 similar found — View groupSolution:
Under SLM, annual depreciation is 90,000 for two years totalling 1,80,000, leaving 6,20,000 on 1 April 2027. On change to WDV at 15 percent, depreciation for 2027-28 is 93,000. Book value before depreciation on 31 March 2028 is 6,20,000 minus 93,000 equals 5,27,000. SLM से वार्षिक ह्रास = (8,00,000-80,000)/8 = ₹90,000. दो वर्षों में ₹1,80,000; 1.4.2027 बही मूल्य = ₹6,20,000. WDV 15% FY 2027-28 ह्रास = ₹93,000. 31.3.2028 ह्रास-पूर्व बही मूल्य = ₹5,27,000.
अंशों के मूल्यांकन की 'प्रतिफल विधि' (Yield Method) में अंशों का मूल्य ज्ञात करने का सूत्र क्या है? / In the 'Yield Method' of valuation of shares, what is the formula to find the value of shares?
4 similar found — View groupSolution:
Yield method values shares as face value times company rate of return divided by normal rate, reflecting earning capacity relative to industry norms. प्रतिफल विधि (Yield Method/Earning Capacity Method) में अंशों का मूल्य = (अंकित मूल्य x कम्पनी की प्रतिफल दर) / सामान्य प्रतिफल दर. उदाहरण: यदि ₹10 अंकित मूल्य वाले अंश पर कम्पनी 20% प्रतिफल दे रही है और सामान्य प्रतिफल दर 10% है, तो अंश का मूल्य = (10 x 20) / 10 = ₹20. यह विधि कम्पनी की लाभ अर्जन क्षमता पर आधारित होती है.
आन्तरिक नियन्त्रण (Internal Control) के बारे में कौन-सा कथन सही है? / Which statement about Internal Control is correct?
4 similar found — View groupSolution:
Internal Control is the overall system of policies, procedures, and plans established by management with four key objectives: (i) Safeguarding assets against unauthorized use or disposition; (ii) Ensuring accuracy and reliability of accounting records and financial reporting; (iii) Promoting operational efficiency by eliminating waste and redundancy; (iv) Ensuring compliance with managerial policies, laws, and regulations. Internal control is NOT limited to fraud prevention alone. Internal audit is just ONE COMPONENT of the internal control system, not the same thing. आन्तरिक नियन्त्रण (Internal Control) प्रबन्धन द्वारा स्थापित नीतियों, प्रक्रियाओं और योजनाओं की एक समग्र प्रणाली है जिसका उद्देश्य है: (i) परिसम्पत्तियों की सुरक्षा, (ii) लेखांकन अभिलेखों की शुद्धता और विश्वसनीयता सुनिश्चित करना, (iii) परिचालन कार्यकुशलता को बढ़ावा देना, और (iv) प्रबन्धकीय नीतियों का पालन सुनिश्चित करना. यह केवल धोखाधड़ी रोकने तक सीमित नहीं है और आन्तरिक अंकेक्षण इसका एक भाग है.
आर्थिक आदेश मात्रा (EOQ) का सूत्र क्या है? / What is the formula for Economic Order Quantity (EOQ)?
4 similar found — View groupSolution:
Economic Order Quantity (EOQ) is the order size at which total inventory cost (ordering cost + carrying cost) is minimized. Formula: EOQ = √(2AO/C), where A = Annual Demand, O = Ordering Cost per order, C = Carrying Cost per unit per annum. At the EOQ point, total ordering cost equals total carrying cost. This model assumes constant demand, fixed ordering cost, and no stock-outs. आर्थिक आदेश मात्रा (EOQ) वह मात्रा है जिस पर कुल स्कन्ध लागत (आदेश लागत + धारण लागत) न्यूनतम होती है. EOQ = √(2AO/C), जहाँ A = वार्षिक माँग (Annual Demand), O = प्रति आदेश लागत (Ordering Cost per order), C = प्रति इकाई प्रति वर्ष धारण लागत (Carrying Cost per unit per annum). EOQ बिन्दु पर कुल आदेश लागत = कुल धारण लागत होती है.
उपरिव्ययों (Overheads) के वर्गीकरण के सम्बन्ध में, निम्नलिखित को सुमेलित कीजिए: सूची-I (वर्गीकरण का आधार): (a) कार्य के अनुसार (By Function) (b) व्यवहार के अनुसार (By Behaviour) (c) तत्व के अनुसार (By Element) (d) नियन्त्रणीयता के अनुसार (By Controllability) / सूची-II (उदाहरण): (i) स्थिर, परिवर्तनशील, अर्ध-परिवर्तनशील / Fixed, Variable, Semi-variable (ii) कारखाना, कार्यालय, विक्रय एवं वितरण / Factory, Office, Selling & Distribution (iii) नियन्त्रणीय और अनियन्त्रणीय / Controllable and Uncontrollable (iv) अप्रत्यक्ष सामग्री, अप्रत्यक्ष श्रम, अप्रत्यक्ष व्यय / Indirect Material, Indirect Labour, Indirect Expenses / Match List-I with List-II and select the correct answer: List-I (Basis of Classification): (a) By Function (b) By Behaviour (c) By Element (d) By Controllability / List-II (Examples): (i) Fixed, Variable, Semi-variable (ii) Factory, Office, Selling & Distribution (iii) Controllable and Uncontrollable (iv) Indirect Material, Indirect Labour, Indirect Expenses
4 similar found — View groupSolution:
Overheads are classified on four bases: (1) By Function - Factory, Office, Selling & Distribution overheads (a-ii); (2) By Behaviour - Fixed, Variable, Semi-variable costs (b-i); (3) By Element - Indirect Material, Indirect Labour, Indirect Expenses (c-iv); (4) By Controllability - Controllable and Uncontrollable costs (d-iii). This classification helps management in cost control, decision-making, and proper allocation of overheads to cost centres and cost units. उपरिव्ययों का वर्गीकरण चार आधारों पर किया जाता है: (1) कार्य के अनुसार (By Function) - कारखाना, कार्यालय, विक्रय एवं वितरण उपरिव्यय (a-ii); (2) व्यवहार के अनुसार (By Behaviour) - स्थिर, परिवर्तनशील, अर्ध-परिवर्तनशील (b-i); (3) तत्व के अनुसार (By Element) - अप्रत्यक्ष सामग्री, अप्रत्यक्ष श्रम, अप्रत्यक्ष व्यय (c-iv); (4) नियन्त्रणीयता के अनुसार (By Controllability) - नियन्त्रणीय और अनियन्त्रणीय (d-iii).